Brand
Milli-Q
Model
IQ-7010
IQ-7000+Ess10
Main Application
Laboratory Water
Operator
Location
Dry Lab (515) and Wet Lab (516)
Introduction
Milli-Q IQ 7000：
Feed Water Requirements: Type II or Type III feed water, such as distilled water, Reverse Osmosis (RO) water, deionized water, or water produced by Merck Millipore Elix systems.
Flow Rate: 0.05–2 L/min.
Total Organic Carbon (TOC): ≤ 2 ppb (μg/L), typically ≤ 5 ppb (μg/L).
Particulates: No particles > 0.22 µm> (when used with Millipak or Millipak Gold point-of-use filters).
Microorganisms:< < 0.01 cfu/ml (with Millipak/Millipak filters);< < 0.05 cfu/ml (with Millipak Gold filters used within a sterile workstation).
Resistivity: 18.2 MΩ·cm at 25°C.
Biological Contaminants (with BioPak final filter):< Endotoxins: < 0.001 EU/ml.
RNase:< < 1 pg/ml.
DNase:< < 5 pg/ml.
Proteases:< < 0.15 μg/ml.
Q-POD Dispenser Features: Screen: 5-inch display with 800 x 600 resolution.
Interface: USB 2.0 port.
Audio: Built-in speaker (8Ω / 5 W max output).
User Interface: Supports 9 languages.
Elix® Essential 10(UV)：
The new generation Elix® Essential pure water system produces laboratory-grade pure water directly from tap water, meeting various global laboratory regulations. The system integrates patented Elix® continuous electrodeionization (EDI) technology, advanced reverse osmosis, and efficient low-carbon purification to meet diverse pure water application needs.
To ensure optimal Elix® pure water quality, the purification sequence is fully optimized. It combines the patented Elix® module (EDI technology) with Progard® comprehensive pretreatment, intelligent RO, and an optional bactericidal UV lamp.
Key Features:
Efficiency: Depending on daily needs, different production capacities are available (10 L/h).
Sustainability: Equipped with the best-in-class Elix® module, it provides consistent water quality while protecting the environment through resin self-regeneration, minimal power consumption, and no need for additional softeners.
Intelligent Control: Smart RO controls water consumption to ensure a constant flow rate and optimal quality.
Storage & Protection: Pure water is stored in a polyethylene (PE) tank with a conical bottom and smooth interior walls to minimize contamination risks. A multifunctional vent filter prevents airborne contamination, and an Automatic Sanitization Module (ASM) prevents biofilm formation.
Traceability: Progard® cartridges utilize RFID technology for real-time monitoring of consumable information, ensuring system safety, optimal performance, and full data traceability.
Technical Specifications:
Production Flow Rate: 10 L/h.
Resistivity: > 5 MΩ·cm (@25°C); typically 10–15 MΩ·cm (@25°C).
Microorganisms: < 0.1 cfu/ml (with Millipak or BioPak filters).
Total Organic Carbon (TOC): < 30 ppb.
Dimensions: 268 x 339 x 470 mm (W x D x H).